Clash 配置
- config.yaml
- mode
- rule - 基于规则路由
- global - 全局路由到单个出口
- direct - 不路由直接访问
- proxies - 上游代理
- type
- ss
- ssr - ShadowsocksR
- vmess
- socks5
- http
- snell
- trojan
- type
- proxy-groups - 代理分组 - LB 策略
- type
- select - 手动选择
- url-test - 使用 url 测速
- url http://www.gstatic.com/generate_204
- interval 300
- relay - 串联所有代理
- 不支持 UDP
- fallback - 基于 URL 检测进行回滚
- load-balance - 基于 eTLD+1 进行负载
- type
- proxy-providers - 指向 yaml 配置 - 包含
proxies: []- type http,file
- rules
- DOMAIN
- DOMAIN-SUFFIX
- DOMAIN-KEYWORD
- GEOIP
- IP-CIDR
- IP-CIDR6
- SRC-IP-CIDR
- SRC-PORT
- DST-PORT
- PROCESS-NAME
- MATCH - 默认匹配
- 添加 no-resolve 可避免 resolve 域名 去匹配 cidr
- 特殊策略 DIRECT, REJECT
clash -t -f config.yaml # test
curl -X PUT 127.0.0.1:9090/configs --json "{}" # reload
# HTTP(S) 代理端口
port: 7890
# SOCKS5 代理端口
socks-port: 7891
# Linux, macOS 转发透明代理端口 (Redirect TCP and TProxy UDP)
# redir-port: 7892
# Linux TProxy 透明代理端口 (TProxy TCP and TProxy UDP)
# tproxy-port: 7893
# HTTP(S), SOCKS4(A)/SOCKS5 多协议端口
# mixed-port: 7890
# SOCKS5/HTTP(S) 代理认证
# authentication:
# - "user1:pass1"
# - "user2:pass2"
# 允许 Lan 连接到本地端口
allow-lan: false
# allow-lan=true 时的监听绑定地址
bind-address: '*'
# 路由模式
# rule - 基于规则的包转发
# global - 全局单出口
# direct - 直接访问
mode: rule
# 日志级别
# info / warning / error / debug / silent
log-level: info
ipv6: false
# 外部 REST API 接口 监听地址
external-controller: 127.0.0.1:9090
# UI 目录
# 访问地址 http://{{external-controller}}/ui
external-ui: folder
# REST 的 密钥
# Authorization: Bearer ${secret}
# secret: ""
# Outbound interface name
interface-name: en0
# Linux fwmark
routing-mark: 6666
# Static hosts for DNS server and connection establishment (like /etc/hosts)
#
# Wildcard hostnames are supported (e.g. *.clash.dev, *.foo.*.example.com)
# Non-wildcard domain names have a higher priority than wildcard domain names
# e.g. foo.example.com > *.example.com > .example.com
# P.S. +.foo.com equals to .foo.com and foo.com
hosts:
# '*.clash.dev': 127.0.0.1
# '.dev': 127.0.0.1
# 'alpha.clash.dev': '::1'
profile:
# Store the `select` results in $HOME/.config/clash/.cache
# set false If you don't want this behavior
# when two different configurations have groups with the same name, the selected values are shared
store-selected: false
# persistence fakeip
store-fake-ip: true
dns:
enable: false
listen: 0.0.0.0:53
# ipv6: false # 是否响应 AAAA
# 默认上游 NS
default-nameserver:
- 114.114.114.114
- 8.8.8.8
enhanced-mode: redir-host # or fake-ip
fake-ip-range: 198.18.0.1/16 # Fake IP addresses pool CIDR
# use-hosts: true # lookup hosts and return IP record
# Hostnames in this list will not be resolved with fake IPs
# i.e. questions to these domain names will always be answered with their
# real IP addresses
# fake-ip-filter:
# - '*.lan'
# - localhost.ptlogin2.qq.com
# 支持 UDP, TCP, DoT, DoH
# 支持指定端口
# 返回第一个响应
# 不会走代理
nameserver:
- 114.114.114.114 # default value
- 8.8.8.8 # default value
- tls://dns.rubyfish.cn:853 # DNS over TLS
- https://1.1.1.1/dns-query # DNS over HTTPS
- dhcp://en0 # dns from dhcp
# 在 nameservers 之外并发请求 DNS
# 用于 GEOIP 非 CN 时
# fallback:
# - tcp://1.1.1.1
# If IP addresses resolved with servers in `nameservers` are in the specified
# subnets below, they are considered invalid and results from `fallback`
# servers are used instead.
#
# IP address resolved with servers in `nameserver` is used when
# `fallback-filter.geoip` is true and when GEOIP of the IP address is `CN`.
#
# If `fallback-filter.geoip` is false, results from `nameserver` nameservers
# are always used if not match `fallback-filter.ipcidr`.
#
# This is a countermeasure against DNS pollution attacks.
# fallback-filter:
# geoip: true
# geoip-code: CN
# ipcidr:
# - 240.0.0.0/4
# domain:
# - '+.google.com'
# - '+.facebook.com'
# - '+.youtube.com'
# 针对域 名配置 NS
# nameserver-policy:
# 'www.baidu.com': '114.114.114.114'
# '+.internal.crop.com': '10.0.0.1'
# 代理设置
proxies:
# Shadowsocks
# The supported ciphers (encryption methods):
# aes-128-gcm aes-192-gcm aes-256-gcm
# aes-128-cfb aes-192-cfb aes-256-cfb
# aes-128-ctr aes-192-ctr aes-256-ctr
# rc4-md5 chacha20-ietf xchacha20
# chacha20-ietf-poly1305 xchacha20-ietf-poly1305
- name: 'ss1'
type: ss
server: server
port: 443
cipher: chacha20-ietf-poly1305
password: 'password'
# udp: true
# 插件配置
plugin: obfs # obfs, v2ray-plugin
plugin-opts:
# obfs - tls,http
# v2ray-plugin - websocket - 暂不支持 QUIC
mode: tls
# host: bing.com
# v2ray-plugin 配置
# tls: true # wss
# skip-cert-verify: true
# host: bing.com
# path: "/"
# mux: true
# headers:
# custom: value
# vmess
# cipher - auto/aes-128-gcm/chacha20-poly1305/none
- name: 'vmess'
type: vmess
server: server
port: 443
uuid: uuid
alterId: 32
cipher: auto
# udp: true
# tls: true
# skip-cert-verify: true
# servername: example.com # priority over wss host
# network: ws
# ws-opts:
# path: /path
# headers:
# Host: v2ray.com
# max-early-data: 2048
# early-data-header-name: Sec-WebSocket-Protocol
- name: 'vmess-h2'
type: vmess
server: server
port: 443
uuid: uuid
alterId: 32
cipher: auto
network: h2
tls: true
h2-opts:
host:
- http.example.com
- http-alt.example.com
path: /
- name: 'vmess-http'
type: vmess
server: server
port: 443
uuid: uuid
alterId: 32
cipher: auto
# udp: true
# network: http
# http-opts:
# # method: "GET"
# # path:
# # - '/'
# # - '/video'
# # headers:
# # Connection:
# # - keep-alive
- name: vmess-grpc
server: server
port: 443
type: vmess
uuid: uuid
alterId: 32
cipher: auto
network: grpc
tls: true
servername: example.com
# skip-cert-verify: true
grpc-opts:
grpc-service-name: 'example'
# http
- name: 'http'
type: http
server: server
port: 443
# username: username
# password: password
# tls: true # https
# skip-cert-verify: true
# sni: custom.com
# Snell
# Beware that there's currently no UDP support yet
- name: 'snell'
type: snell
server: server
port: 44046
psk: yourpsk
# version: 2
# obfs-opts:
# mode: http # or tls
# host: bing.com
# Trojan
- name: 'trojan'
type: trojan
server: server
port: 443
password: yourpsk
# udp: true
# sni: example.com # aka server name
# alpn:
# - h2
# - http/1.1
# skip-cert-verify: true
- name: trojan-grpc
server: server
port: 443
type: trojan
password: 'example'
network: grpc
sni: example.com
# skip-cert-verify: true
udp: true
grpc-opts:
grpc-service-name: 'example'
- name: trojan-ws
server: server
port: 443
type: trojan
password: 'example'
network: ws
sni: example.com
# skip-cert-verify: true
udp: true
# ws-opts:
# path: /path
# headers:
# Host: example.com
# ShadowsocksR
# The supported ciphers (encryption methods): all stream ciphers in ss
# The supported obfses:
# plain http_simple http_post
# random_head tls1.2_ticket_auth tls1.2_ticket_fastauth
# The supported supported protocols:
# origin auth_sha1_v4 auth_aes128_md5
# auth_aes128_sha1 auth_chain_a auth_chain_b
- name: 'ssr'
type: ssr
server: server
port: 443
cipher: chacha20-ietf
password: 'password'
obfs: tls1.2_ticket_auth
protocol: auth_sha1_v4
# obfs-param: domain.tld
# protocol-param: "#"
# udp: true
# 代理分组 - LB 策略
proxy-groups:
# 中继 - 会经过给定的所有代理
# 不支持 UDP
# clash <-> http <-> vmess <-> ss1 <-> ss2 <-> Internet
- name: 'relay'
type: relay
proxies:
- http
- vmess
- ss1
- ss2
# 基于请求 URL 的速度来选择
- name: 'auto'
type: url-test
proxies:
- ss1
- ss2
# tolerance: 150
# lazy: true
url: 'http://www.gstatic.com/generate_204'
interval: 300
# 基于优先级选择一个可用的代理
# 类似一个 url-test 自动分组
- name: 'fallback-auto'
type: fallback
proxies:
- ss1
- ss2
url: 'http://www.gstatic.com/generate_204'
interval: 300
# 基于 eTLD+1 进行负载
- name: 'load-balance'
type: load-balance
proxies:
- ss1
- ss2
url: 'http://www.gstatic.com/generate_204'
interval: 300
# strategy: consistent-hashing # round-robin
# 选择 proxy 或 proxy group
# 可通过 RESTful API 来切换
- name: Proxy
type: select
# disable-udp: true
proxies:
- auto
- DIRECT # 可以指定 直接
# DIRECT 配置
interface-name: en1
routing-mark: 6667
#
use:
- provider1
proxy-providers:
provider1:
type: http
url: 'url'
interval: 3600
path: ./provider1.yaml
health-check:
enable: true
interval: 600
# lazy: true
url: http://www.gstatic.com/generate_204
test:
type: file
path: /test.yaml
health-check:
enable: true
interval: 36000
url: http://www.gstatic.com/generate_204
rules:
- IP-CIDR,127.0.0.0/8,DIRECT
- IP-CIDR,127.0.0.0/8,DIRECT
- DOMAIN-SUFFIX,google.com,auto
- DOMAIN,google.com,auto
- DOMAIN-KEYWORD,google,auto
- DOMAIN-SUFFIX,ad.com,REJECT
- SRC-IP-CIDR,192.168.1.201/32,DIRECT
# optional param "no-resolve" for IP rules (GEOIP, IP-CIDR, IP-CIDR6)
- GEOIP,CN,DIRECT
- DST-PORT,80,DIRECT
- SRC-PORT,7777,DIRECT
- RULE-SET,apple,REJECT # Premium only
- MATCH,auto
proxies
# socks5
- name: 'socks'
type: socks5
server: server
port: 1080
# username: username
# password: password
# tls: true
# skip-cert-verify: true
# udp: true
proxy-groups
Rule
# 已知 IP 段
- IP-CIDR,127.0.0.0/8,REJECT
- IP-CIDR,0.0.0.0/8,REJECT
- GEOIP,LAN,DIRECT
# 国内常见
- DOMAIN-SUFFIX,taobao.com,DIRECT
- DOMAIN-SUFFIX,qq.com,DIRECT
- DOMAIN-SUFFIX,jdapi.com,DIRECT
# 国外常见
- DOMAIN-SUFFIX,google.com,auto
- GEOIP,CN,DIRECT
#- RULE-SET,China,DIRECT
- MATCH,auto
| type | desc |
|---|---|
| DOMAIN-SUFFIX | 域名后缀 |
| DOMAIN | 域名匹配 |
| DOMAIN-KEYWORD | 域名关键字匹配 |
| IP-CIDR | IP 段匹配 |
| SRC-IP-CIDR | 源 IP 段匹配 |
| GEOIP | GEOIP 数据库（国家代码）匹配 |
| DST-PORT | 目标端口匹配 |
| SRC-PORT | 源端口匹配 |
| PROCESS-NAME | 源进程名匹配 |
| RULE-SET | Rule Provider 规则匹配 |
| MATCH | 全匹配 |